G Z2

The GZ2 is reliable, simple and safe!
Tilling the ground, even hard soil, becomes easy and with the guarantee of a job well done!
The GZ2 is equipped with forward and reverse gears.

The GZ2 is a compact tiller, ideal for tilling easily even where there is not much space.
The 4-star hoe tiller measures 57 cm. Using the optional tiller kit, it is possible to have only 2 stars of tines with a working width of 35 cm, and also to use 6 stars of tines obtaining a width of 80 cm.

The Grillo GZ2 is equipped with active coupling device; in fact, the lever on the handlebar, when pressed, starts the rotation of the tines. When the lever is released the tines stop immediately but the engine remains running.
The side discs should not be used when tilling hard soil that has never been worked yet.
Instead, in softer soils, side discs become very useful: they help maintain direction, advance and protect nearby crops from being tilled.

Two spurs are supplied as standard: one for soft soil and one for hard soil. The adjustment of the spur determines the working depth.
When the spur is set low, the tines sink deeper into the soil.
While with the spur set high, the center of gravity moves forward, and the machine will then tend to move forward faster.
The use of the side discs and high spur, increase flotation and advance.
The GZ2 is fast, stable and precise!
The transmission is oil-bath gears, designed for durability. It is built entirely in Grillo factories.

The 3 HP motor provides adequate torque for tilling already at 2400 rpm! You can till slowly, from 80-90 rpm, or quickly, up to 155 rpm, depending on soil conditions and the desired level of soil shredding. Even for the deepest tillage, with the tiller at full width and totally buried, engine power places no limitations on the GZ2!
The handlebar is laterally adjustable with no need to stop. There are no screws or knobs to loosen and then tighten. It is a must-have feature when you don't want to step on tilled soil or if you are tilling near hedges, fences or under branches.

The height-adjustable handlebar will meet the needs of all users, and the right position will always be found for all working depths.
In addition, the lower adjustment is useful for moving the GZ2 on the standard front transfer wheel.
The GZ2 can also be transported in the trunk of the car by lowering the handlebar.
Using the furrower is a pleasure and the result always leaves you satisfied!

Cleaning and maintenance are super easy! Simply check the engine oil level periodically and clean the filter. The gearbox does not require any maintenance. The GZ2, like all Grillo products, is designed and built to last and maintain its value over time. All components, from the simplest to the most complex, are of high quality. Grillo mounts the latest generation engine equipped with a Ready Start device for easy starting! All engines feature overhead valves to have minimal fuel consumption, emissions, noise and vibration. Frame, handlebar, tiller, everything is built by Grillo in Italy, using the best materials and the latest technology to have high, consistent and 100% controlled quality.